M6 Complete TV Wall Mount Bracket Bolts & Lag Screws • Stainless • VESA 200

M6 TV Complete Wall Mount Installation Fastener Kit
Bracket to TV + Bracket to Wall
For: VESA 75 or VESA 100 TVs & Monitors
Grade 18-8 Stainless Steel

This kit includes all parts included in our TV wall mount kit plus the Lag Screws to attach the bracket to your wall.

Most TV manufacturers comply with the VESA (Video Electronics Standards Association) standards. If you look at the back of your TV you will notice that the screws holes are in a perfect square pattern. When you measure the distance between holes they should be as follows:

    VESA 75 measures 75 mm x 75 mm (approx. 3” x 3”)
          Uses M4 (Small) screws
    VESA 100 measures 100 mm x 100 mm (approx. 4” x 4”)
         Uses M4 (Small) screws
    VESA 100/200 measures 100 mm x 200 mm (approx. 4” x 8”)
         Uses M4 (Small) screws
    VESA 200 measures 200 mm x 200 mm (approx. 8” x 8”)
         Uses M6 (Medium) screws
    VESA 400 measures 400 mm x 400 mm (approx. 16” x 16”)
        Uses M8 (Large) screws

There are no established standards for bracket to wall fasteners. However, our research has found that TVs 40” or less can be firmly held in place by 1/4” x 2 ½” long lag screws. Note: drill a 1/8” or 5/32” pilot hole in the middle of the studs before installing the lag screws.

Our fasteners are made of grade 18-8 (18% Chromium and 8% nickel) solid stainless steel which will prevent rust.

Do not over tighten TV mounting fasteners. Snug is good but too tight will strip out internal TV threads and wooden studs.
_________________________________________________________

You may be able to locate plated steel or painted steel bolts and screws at a lower price, but why would you want to mount your expensive TV with the cheapest possible fasteners? Treat yourself and your TV to the best, use stainless steel and forget about rust.

_________________________________________________________

This packet contains enough hardware to mount one VESA 200 x 200 TV or Monitor. This kit includes:
     1.) (4) stainless steel, Phillip head M6 machine screws (bolts)
     2.) (4) stainless steel, 6mm flat washers
     3.) (4) stainless steel, ¼” x 2 ½” lag screws
     4.) (4) stainless steel, ¼” flat washers

One payment of $9.00 buys 4 bolts, 4 lags and 8 washers …
Flat rate shipping in the US is $1.95
_________________________________________________________