Boat/Marine Cleat Fastener Kit for 6 or 6 ½” through-bolt cleats
Boat/Marine Cleat Fastener Kit for 6 or 6 ½” thru-bolt cleats
(Cleat Not Included)
Grade 18-8 Stainless Steel
This set of fasteners that will help you install a pair of medium sized through-bolts on to the deck your boat. If your cleats look similar to the cleat in our pictures, then this is the kit for you.
Our fasteners are made of grade 18-8 (18% Chromium and 8% nickel) solid stainless steel which in what you need to prevent rust in marine applications.
Our bolts (or machine screws) are the proper diameter (1/4”) to fit through the cleat without drilling, and are the right length to go through the cleat, the fiberglass and still have enough length for the washers and lock nut. The heads have counter sunk undersides to fit correctly into the cleat hole and have Phillips oval top heads which are stronger and more attractive than flat heads. The nylon insert lock nuts hold tight for years. Finally, we provide a set of rubber backed washers to spread the load over a wider area and help keep moisture out. If you really want to spread out the load, we have included a set of 1” diameter fender washers in this kit.
You may think that you can buy a set of similar fasteners for your boat at a local hardware store and that may be true. However, it could be a challenge locating everything at one store or during one trip to that store. Save some driving around time and gasoline by simply ordering a set from us and have it all delivered to your door.
_________________________________________________________
This packet includes:
1.) (4) grade 18-8 stainless steel, Phillips oval head bolts (machine screws)
2.) (4) grade 18-8 stainless steel, nylon insert lock nuts
3.) (4) grade 18-8 stainless steel, rubber backed washers
4.) (4) grade 18-8 stainless steel, fender washers
One payment of $13.50 buys 4 bolts, 4 lock nuts
and 8 washers …
Flat rate shipping in the US is $3.96
_________________________________________________________
